Serving Everett, WA & Snohomish County: 24/7 Emergency Response (425) 845-0257
Leak Detection in Everett, WA
24/7 Emergency Line Open Everett, WA

Emergency Leak Detection in Everett, WA

A meter that keeps running with every fixture off is the clearest sign of a hidden leak, and finding it without tearing into walls or floors is what leak detection equipment is for.

A rising water bill with no obvious cause, or a water meter that keeps spinning even with every fixture in the house turned off, are the two most common reasons Everett homeowners call for leak detection. In both cases, the leak is somewhere you can't see it, behind a wall, under a slab, or along a buried water line, and finding it without unnecessary demolition is the whole point of proper detection equipment.

We use acoustic listening equipment and, when needed, thermal imaging to pinpoint a hidden leak's exact location before opening any wall or flooring, which keeps repair costs focused on the actual problem instead of exploratory guesswork.

Local Cause

Why Hidden Leaks Are Common in Everett's Older Homes

Homes built before 1970 with galvanized supply lines are the most common source of the hidden leaks we find in Everett. Galvanized pipe corrodes from the inside out, and a pinhole leak can develop long before there's any visible sign at the surface, especially when the affected section runs through a wall cavity or under a concrete slab.

Slab leaks specifically show up more often in homes where a copper supply line runs beneath a concrete foundation, and years of soil shifting or the original installation's proximity to rebar can wear through the pipe wall from the outside.

Everett Neighborhoods

Finding Hidden Leaks Across Everett

Hidden leaks follow pipe age and construction type. In older neighborhoods like Port Gardner, Riverside, and Northwest Everett we start with the galvanized supply lines, and in Westmont's multifamily buildings we often have to separate one unit's leak from a shared riser. Acoustic equipment lets us locate the leak before any wall or floor is opened, whatever the neighborhood.

Emergency Response

When a Hidden Leak Is an Emergency

A hidden leak becomes an emergency when water is appearing and you cannot tell where it starts, when the meter is spinning fast with everything off, or when a ceiling, floor or wall is wet. Close the main valve if the leak is serious, then call our 24/7 line.

Acoustic and thermal tools let a technician narrow down the source before anything is cut open. That matters most in an emergency, because the right first opening limits both the damage and the repair cost. If water has already reached finished surfaces, we can bring in water mitigation as well.

Call the 24/7 line right away if

  • The meter keeps moving after every fixture is off
  • Water is dripping from a ceiling or seeping along a wall with no visible source
  • A concrete floor feels warm or damp, or you hear running water in a silent house
  • Your water pressure dropped suddenly
  • A utility alert or sudden bill spike shows water running continuously
Signs

Signs of a Hidden Leak

  • A water meter that continues running with every fixture and appliance off.
  • An unexplained increase in your water bill without a change in usage.
  • A warm spot on a slab floor, which often indicates a hot water line leak underneath.
  • The sound of running water when no fixture is in use.
  • Unexplained mold, mildew, or a musty smell in one area of the house.
Method

Acoustic and Thermal Leak Detection

Acoustic detection equipment listens for the specific sound a pressurized leak makes as it escapes a pipe, which lets us narrow the location to a specific section of wall or floor before any cutting starts. For a suspected slab leak, we can often confirm the location within a few feet using this method alone.

Thermal imaging is useful as a secondary confirmation tool, particularly for a hot water line leak under a slab, since the escaping hot water creates a detectable temperature difference at the surface even when nothing is visibly wet.

Options

From Detection to Repair

Once we've located the leak, the repair itself depends on where it is and what's causing it. A leak in an accessible wall cavity or crawlspace is usually a straightforward spot repair. A confirmed slab leak may call for either a direct slab penetration repair or rerouting the line entirely, depending on access and the extent of surrounding pipe corrosion.

For homes with galvanized supply lines and a pattern of repeated leaks in different locations, we'll also discuss whether a full repipe makes more financial sense than continuing to chase individual leaks as they occur. Every repair is performed to the Uniform Plumbing Code standards Washington State has adopted, not just patched to stop the immediate symptom.

Not Sure What's Wrong?

Not Sure Where the Leak Is Coming From?

Most callers describe this exact situation: the meter is running, but there's no visible sign of water anywhere in the house. That's the expected pattern for a hidden leak, and it's exactly what acoustic detection equipment is designed to solve. You don't need to know where the leak is before calling. that's what the diagnostic visit is for.

Meter and Bill

Water Meter Running or a High Water Bill?

A meter that keeps turning with every fixture, appliance and irrigation zone off is the clearest sign that water is escaping somewhere. A bill that climbs for no reason you can explain points the same way. Watch the meter for a few minutes with everything closed, and call if it moves.

The City of Everett now reads meters monthly instead of every other month, and says the more frequent readings help leaks get spotted sooner. If you find and repair a leak, the City offers a leak adjustment request that requires the repair to be completed first, covers a maximum of four 30-day billing cycles and is calculated under Everett Municipal Code 14.16.830. Keep your repair invoice, since the City asks for repair bills or receipts with the request.

Rules and forms can change, so confirm the current process with City of Everett Utility Services before counting on an adjustment.

Ceilings and Walls

Stains on a Ceiling or Wall: Finding the Source

A brown stain on a ceiling, a bubbling patch of paint or a soft spot in drywall usually means water has been moving behind the surface for a while. The wet spot is rarely right under the leak, because water travels along framing, pipes and insulation before it shows itself.

We trace it from the stain back toward the source with moisture meters and thermal imaging, checking the usual suspects first. Those are a bathroom above, a supply line or drain in the wall, a shower valve or tub drain, and sometimes a roof or window leak that is not plumbing at all. Finding the source first means opening less drywall.

If a ceiling is sagging or dripping, keep people out from under it and close the main valve if a supply line might be the cause.

Crawlspaces

Under-House and Crawlspace Leaks

Crawlspace leaks hide because nobody looks there until the floor above feels soft or the water bill climbs. Supply lines, drain connections and water heater lines run overhead in many crawlspaces, and a slow drip can soak insulation and subfloor for months.

Warning signs include damp or sagging insulation, a musty smell through floor vents, soft spots in flooring and a meter that runs with everything off. We test the supply and drain lines and separate plumbing water from groundwater seepage, since the fixes are very different. If the water is coming from the ground, the answer is drainage work, covered on our basement waterproofing page.

Irrigation

Irrigation and Sprinkler Line Leaks

Irrigation leaks are easy to mistake for a house leak, because the meter runs whenever a zone leaks and the wet patch may be nowhere near the building. Clues include a zone that runs weak, a lawn patch that is soggy or unusually lush and a valve box full of water.

Closing the irrigation supply and watching whether the meter stops tells you whether the leak is on the irrigation side. If it stops, we can locate the failed fitting or line. If it keeps running, the leak is elsewhere in the system and we keep locating. A system with a backflow assembly may also need periodic testing, covered on our backflow testing page.

Commercial Properties

Commercial and Multifamily Buildings

Leaks in apartment buildings, shops and shopping plazas take longer to trace because several tenants and long pipe runs share the system. Our commercial plumbing page covers how we handle those buildings and how property managers can set up service.

Pricing

What Affects Leak Detection Cost

Cost Factors

  • Method: acoustic detection alone is less costly than adding thermal imaging confirmation.
  • Leak location: a slab leak typically takes longer to pinpoint than a wall-cavity leak.
  • Access: a finished space adds complexity compared to an open crawlspace or unfinished basement.
  • Repair scope: detection cost is separate from the repair itself, which varies by what's found.
  • Pipe material: galvanized pipe often needs broader assessment once one leak point is found.

Leak detection to locate a leak is sometimes covered, or partially covered, under homeowner's policies with specific leak detection endorsements. The subsequent repair coverage depends on whether the damage was sudden or gradual.

Want your real number? Call (425) 845-0257.

Before You Call

What to Check Before You Call

  • Check your water meter with all fixtures off. if it's still moving, you have an active leak.
  • Note any warm spots on floors, which can indicate a hot water slab leak.
  • Check recent water bills for a clear increase compared to your typical usage.
  • Note any musty smells or unexplained dampness in a specific area of the house.
  • Avoid assuming the leak's location based on where symptoms appear, since water often travels before surfacing.
Questions

Leak Detection Questions

How accurate is acoustic leak detection?

In most cases, we can narrow a leak's location to within a few feet, which minimizes how much wall or flooring needs to be opened for the actual repair.

Will you need to cut into my walls or floor to find the leak?

Typically not for the detection phase itself. Acoustic and thermal methods locate the leak non-invasively. Opening the wall or floor happens only for the repair, once we know exactly where.

What if the leak turns out to be under a slab?

See our slab leak detection & repair page for what that process specifically involves.

How fast can you respond to a suspected hidden leak?

We can typically schedule a diagnostic visit quickly. A leak causing active visible damage is treated as more urgent.

Do you serve areas outside Everett?

Yes, including Edmonds, Mukilteo, Snohomish, Lake Stevens, Mill Creek, Marysville, and Lynnwood.

Do you offer emergency leak detection at night or on weekends?

Yes. Our line is open 24/7. If the leak is serious, close the main valve first, then call and describe where the water is appearing.

Suspect a Hidden Leak?

Call now for 24/7 emergency leak detection before the damage spreads.

Call (425) 845-0257
Coverage

Everett Pro Service Area

☎
Call (425) 845-0257